Supported GCS

For APM users

FlytConsole
QGC
APM Planner/Mission Planner
FlytConsole

FlytConsole, a web app for configuring your drone comes pre-packaged in FlytOS. Follow the steps below to get started with FlytConsole.

Note: FlytConsole has beta support for APM, and still has a couple of widgets to be released with APM support, till then users are requested to follow other supported GCS mentioned on the page.

  • Power on your Flight Computer running FlytOS.

  • Connect your personal computer to the same network that your Flight Computer is connected to.

  • If your flight computer is in Access Point(AP)/HotSpot mode, you can connect to its WiFi (ssid: flytos_WiFi). If the flight computer is in client mode, connect your personal computer to the same router with which your flight computer is connected to.

  • Next, go to the following link to open FlytConsole: http://localhost/flytconsole or http://<ip-address-of-device>/flytconsole

  • Follow the steps here to learn about FlytConsole widgets.

QGC

QGroundControl also supports FlytOS. Follow the steps given below to get started with QGCS:

  • Download and Install QGC.

  • Once installed, launch the QGC app.

  • Connect your personal computer to the same WiFi network your flight computer is connected to.

  • Create a new TCP Comm Link in QGC with Host Address as IP Address of your flight computer, and TCP Port as 5760.

  • Once done, press the connect button and QGC will now connect to FlytOS.

  • You can go through their User’s Guide to learn more about QGC.

APM Planner/Mission Planner

APM Planner and Mission Planner also support FlytOS. Follow the steps given below to get started with them:

  • Download and install either of APM Planner/Mission Planner by following the above links.

  • Once installed launch the app.

  • Connect your personal computer to the same WiFi network your flight computer is connected to.

  • Create a new TCP Comm Link in the app, with Host Address as IP Address of your flight computer and TCP Port as 5760.

  • Once done, press the connect button and the app will now connect to FlytOS.

For PX4 users

FlytConsole
QGC
FlytConsole

FlytConsole, a web app for configuring your drone comes pre-packaged in FlytOS. Follow the steps below to get started with FlytConsole.

  • Power on your Flight Computer running FlytOS.

  • Connect your personal computer to the same network that your Flight Computer is connected to.

  • If your flight computer is in Access Point(AP)/HotSpot mode, you can connect to its WiFi (ssid: flytos_WiFi). If the flight computer is in client mode, connect your personal computer to the same router with which your flight computer is connected to.

  • Next, go to the following link to open FlytConsole: http://localhost/flytconsole or http://<ip-address-of-device>/flytconsole

  • Follow the steps here to learn about FlytConsole widgets.

QGC

QGroundControl also supports FlytOS. Follow the steps given below to get started with QGCS:

  • Download and Install QGC.

  • Once installed, launch the QGC app.

  • Connect your personal computer to the same WiFi network your flight computer is connected to.

  • Create a new TCP Comm Link in QGC, with Host Address as IP Address of your flight computer and TCP Port as 5760.

  • Once done, press the connect button and QGC will now connect to FlytOS.

  • You can go through their User’s Guide to learn more about QGC.