Home FlytBase Forums API Reference

Supported GCS

APM-SITL

FlytConsole

FlytConsole, a web app for configuring your drone comes pre-packaged in FlytSim. Follow the steps below to get started with FlytConsole.

  1. Start FlytSim if you have not already done that.
  2. Open FlytConsole: http://localhost/flytconsole or http://<ip-address-of-device>/flytconsole
  3. Follow the steps here to learn about FlytConsole widgets.

QGC

QGroundControl also supports FlytSim. Follow the steps given below to get started with QGCS:

  1. Download and Install QGC.
  2. Once installed, launch the QGC app.
  3. Start FlytSim if you have not already done that.
  4. Create a new TCP Comm Link in QGC, with Host Address as IP Address of your machine and TCP Port as 5760.
  5. Once done, press the connect button and QGC will now connect to FlytSim.
  6. You can go through their User’s Guide to learn more about QGC.

APM Planner/Mission Planner

APM Planner and Mission Planner also support FlytSim. Follow the steps given below to get started with them:

  1. Download and install either of APM Planner/Mission Planner by following the above links.
  2. Once installed launch the app.
  3. Start FlytSim if you have not already done that.
  4. Create a new TCP Comm Link in the app, with Host Address as IP Address of your flight computer and TCP Port as 5760.
  5. Once done, press the connect button and the app will now connect to FlytSim.

PX4-SITL

FlytConsole

FlytConsole, a web app for configuring your drone comes pre-packaged in FlytSim. Follow the steps below to get started with FlytConsole.

  1. Start FlytSim if you have not already done that.
  2. Open FlytConsole: http://localhost/flytconsole or http://<ip-address-of-device>/flytconsole
  3. Follow the steps here to learn about FlytConsole widgets.

QGC

QGroundControl also supports FlytSim. Follow the steps given below to get started with QGCS:

  1. Download and Install QGC.
  2. Once installed, launch the QGC app.
  3. Start FlytSim if you have not already done that.
  4. Create a new TCP Comm Link in QGC, with Host Address as IP Address of your machine and TCP Port as 5760.
  5. Once done, press the connect button and QGC will now connect to FlytSim.
  6. You can go through their User’s Guide to learn more about QGC.